The PP-200 oscilloscope probe is a passive low-impedance attenuation probe.
The oscilloscope probe has been designed and calibrated for use on instruments having an input impedance of 1M Ω paralleled by 20pF.
However, it may be recalibrated for use on instruments having an input capacitance of 15 to 40pF.
The oscilloscope probe incorporation a two position (1X, 10X) slide switch in the compensating network and cable length of 1.2 meters.
The specification is as follows:
CHARACTERISTICS
Temperature 115°C to 70°C
Characteristic Performance Requirements
Attenuation X1 X10
Input Capacity 85pF~115pF 18.5pF~22.5pF
DSO Input Capacity 15pF~40pF
Input Resistance X1:1MΩ+/-2% X10:10MΩ+/-2%
Band width X1:DC-6MHz X10:DC-200Mhz
Max input Voltage X1:<200V DC+PeakAC
X10:<600V DC+PeakAC
Oscilloscope Probe Body 95mm
Coaxial Cable 1200mm
Weight 55g(max)
Standard Accessories:
Probe Tip----------1pcs
Ground Lead--------1pcs
Marker Ring--------2pcs
TipLocatingSleeve--1pcs
Adjustment Tool----1pcs
